Acrylic Eggshell Floor Enamel Supplier in China
Acrylic Eggshell Floor Enamel paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Acrylic coating

Acrylic Multi-Purpose Primer
Acrylic Eggshell Floor Enamel
Acrylic Clear Coat
Acrylic Enamel For Interior Use

Acrylic Copolymer Exterior Flat Paint
Acrylic DTM Rust Resistant Coatings
Acrylic Elastomer Coating
Acrylic Copolymer Roof Coating
Waterborne Acrylic Enamel Undercoater
Acrylic High Infraed Heat Reflectivity Coating

Acrylic Finish Gloss
Acrylic Conversion Coating
Acrylic Metal Primer

Acrylic Patching Seam Sealer
Acrylic Conversion Coating
Two Pack Catalysed Acrylic Finish
Acrylic Elastomeric Wall Coating
Quick Drying Clear Urethane Alkyd Varnish
Aluminum Acrylic Coating Automotive Grade Acrylic Lacquer Topcoat
Baking Glossy Topcoat Based On Thermoset Acrylic Resin
Rapid Dry Pure Acrylic Coating
Acrylic Urethane Catalyzed Coating
Single Pack Acrylic Poly Siloxane Finish Coating

  

Acrylic Eggshell Floor Enamel

PRODUCT SPECIFICATIONS:

DESCRIPTION

A superior quality, 100% acrylic eggshell floor enamel, especially formulated to protect and beautify. Easy to apply, self leveling and fast drying. It is fortified to withstand abuse from marring and scuffing.

USES

Recommended for interior or exterior, new or previously painted surfaces such as floors, porches, stairs, patios, verandas, decks and dadoes. Ideal for wood, metal or concrete surfaces.

SIZES

1 Gallon, ¼ Gallon (Quart).

COLORS

All Base 1, Base 2 and Base 3 Calibrated Colors, Stone Gray and Light Gray.

SURFACE PREPARATION

NEW WORK:
NEW WOOD (EXTIOR)
1 coat of 2 or 8.

PRODUCT DETAIL

Vehicle:
Sheen:
%Solids:
By Weight:
By Volume:
Weight/Gallon:
Flashpoint:

100% Acrylic
Eggshell (semi-flat 0-10
at 60°)
52%
36%
5.08 kg
259°C

Volatile Organic Compounds (VOC) Level:

Max. 250 g/l (2.08 lbs/gal)

Thinner:
Cleanup:
Dry time:
To Touch:
To Recoat:
To Use:

Water
Soap and water
At 77°F (25°C) 50% RH
0.5 Hour
4 Hours
4 Hours

Recommended Film Thickness:

Dry:
Wet:

33 μm
102 μm

1 or 2 coats of Withstand Latex Floor Enamel.
NEW WOOD (INTIOR)
1 coat of 11.
1 or 2 coats of Withstand Latex Floor Enamel.
NEW METAL
1 coat of 3 or 9.
1 or 2 coats of Withstand Latex Floor Enamel.
NEW CONCRETE
1 coat of Withstand Latex Floor Enamel thinned with 237 ml water per gallon.
1 coat of Withstand Latex Floor Enamel (full body).
REPAINT (PREVIOUSLY PAINTED SURFACES):
Spot cover bare areas with 2.
1 or 2 coats of Withstand Latex Floor Enamel.

Coverage:
Application:
Brush:
Roller:
Pad:
Conv. Spray:
Airless Spray:

38 sq.m / gallon
Nylon or polyester
3/8'' nap cover
Standard
Not recommended
Not recommended

Limitations:
DO NOT APPLY when air, surface or product temperature is below 50°F (10°C) or if tempera-ture might drop to this level within 4 hours after application.

Notes:
Allow all new concrete to age 30 days before painting. A non-slip additive (i.e. clean sand) may be added to reduce slipping hazards.

 

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.