Acrylic Enamel For Interior Use Supplier in China
Acrylic Enamel For Interior Use paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Acrylic coating

Acrylic Multi-Purpose Primer
Acrylic Eggshell Floor Enamel
Acrylic Clear Coat
Acrylic Enamel For Interior Use

Acrylic Copolymer Exterior Flat Paint
Acrylic DTM Rust Resistant Coatings
Acrylic Elastomer Coating
Acrylic Copolymer Roof Coating
Waterborne Acrylic Enamel Undercoater
Acrylic High Infraed Heat Reflectivity Coating

Acrylic Finish Gloss
Acrylic Conversion Coating
Acrylic Metal Primer

Acrylic Patching Seam Sealer
Acrylic Conversion Coating
Two Pack Catalysed Acrylic Finish
Acrylic Elastomeric Wall Coating
Quick Drying Clear Urethane Alkyd Varnish
Aluminum Acrylic Coating Automotive Grade Acrylic Lacquer Topcoat
Baking Glossy Topcoat Based On Thermoset Acrylic Resin
Rapid Dry Pure Acrylic Coating
Acrylic Urethane Catalyzed Coating
Single Pack Acrylic Poly Siloxane Finish Coating

  

Acrylic Enamel For Interior Use

PRODUCT SPECIFICATIONS:

A premium quality, 100% acrylic enamel for interior use, formulated for superior adhesion and excellent hide. Its finish is stain and mar resistant and cleans easily, making it ideal for every room in the house.

USES

Recommended for walls, ceilings and trim usually found in bedrooms, living rooms and family rooms. Ideal for wood, primed metal, drywall, masonry, plaster or previously painted surfaces.

SIZES

1 Gallon, ¼ Gallon (Quart).

COLORS

All Calibrated Colors, Super One-Coat White, Designer White; Base 1, Base 2, Base 3, Yellow and red.

SURFACE PREPARATION

NEW WORK:
NEW WOOD
Spot prime the knots with 11

PRODUCT DETAIL

Vehicle:
Sheen:
%Solids:
By Weight:
By Volume:
Weight/Gallon:
Flashpoint:

100% Acrylic Latex
Eggshell (Semi-flat -30 at 85°)
52%
40%
4.9 kg
Not applicable

Volatile Organic Compounds (VOC) Level:

Max. 164 g/l (1.37 lbs/gal)

Thinner:
Cleanup:
Dry time:
To Touch:
To Recoat:
To Use:

Water
Soap and water
At 77°F (25°C) 50% RH
0.5 Hour
2 Hours
2 Hours

Recommended Film Thickness:

Dry:
Wet:

38 μm
94 μm


METAL 1 coat of metal primer.
1 or 2 coats of Interior Velvet.
PLAST/ GYPSUM New - After dry, 1 coat of 1.
Old - 60 days after application, 1 coat of 1 or 2 coats of Interior Velvet.
MASONRY OR CONCRETE/ AGGREGATE Allow the new surface to cure for, at least, 30 days. 1 or 2 coats of Interior Velvet. (Use a professional surface filler to patch/ fill surface holes and imperfections).
DRYWALL 1 coat of 4. 1 or 2 coats of Interior Velvet.
REPAINT (PREVIOUSLY PAINTED SURFACES):
Spot prime bare areas with appropriate primer.
1 or 2 coats of Interior Velvet.

Coverage:
Application:
Brush:
Roller:
Pad:
Conv. Spray:
Airless Spray:

38 sq.m / gallon
Nylon or polyester
3/8'' nap cover
Standard
Thin with up to 1 pint
(~ 0.5 l) of water
At package consistency

Limitations:
DO NOT APPLY when air, surface or product temperature is below 50°F (10°C) or if tempera-ture might drop to this level within 4 hours after application.

 

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.