Acrylic Finish Gloss Supplier in China
Acrylic Finish Gloss paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Acrylic coating

Acrylic Multi-Purpose Primer
Acrylic Eggshell Floor Enamel
Acrylic Clear Coat
Acrylic Enamel For Interior Use

Acrylic Copolymer Exterior Flat Paint
Acrylic DTM Rust Resistant Coatings
Acrylic Elastomer Coating
Acrylic Copolymer Roof Coating
Waterborne Acrylic Enamel Undercoater
Acrylic High Infraed Heat Reflectivity Coating

Acrylic Finish Gloss
Acrylic Conversion Coating
Acrylic Metal Primer

Acrylic Patching Seam Sealer
Acrylic Conversion Coating
Two Pack Catalysed Acrylic Finish
Acrylic Elastomeric Wall Coating
Quick Drying Clear Urethane Alkyd Varnish
Aluminum Acrylic Coating Automotive Grade Acrylic Lacquer Topcoat
Baking Glossy Topcoat Based On Thermoset Acrylic Resin
Rapid Dry Pure Acrylic Coating
Acrylic Urethane Catalyzed Coating
Single Pack Acrylic Poly Siloxane Finish Coating

  

Acrylic Finish Gloss

PRODUCT SPECIFICATIONS:

General Description:
ACRYLIC FINISH GLOSS HJ085 is a top coated based
on acrylic polyol and polyfunctional isocyanate. It is
developed or non – yellowing finish, therefore, it is an
excellent coating for exterior.
Major Uses:
Ideal for wood, steel, aluminium with excellent
mechanical properties, good outdoor durability and quick
drying.
Characteristics and Physical
Properties:

 

 

Colour

As per RAL colour card

Specific Gravity

1.1+/-0.1 depending on color.

Volume Solids

46%

Flash Point

210C

Coverage

9 m2 / lit.

 

 

Dft.

50 microns.

 

 

Pot Life

6 hrs.

Mixing Ratio

Acrylic finish Gloss AW/085 – 100%

 

Catalyst -50%

Application Details:

Method of Application: By brush, roller airless and

Conventional Spray.

Spray Data

Conventional Spray

Nozzle Orifice

2 – 3mm.

 

Nozzle Pressure

43 – 57 psi.

 

Dilution

5 – 10 %

 

Thinner

# 135

 

Airless

Nozzle Orifice

0.38 – 0.46 mm.

 

Nozzle Pressure

1138 -1710 psi.

 

Dilution

0 -5%

 

Thinner

#135

 

Application Condition: Temperature of the substrate should be min.
50C.
Surface Preparation:
Steel:
· Surface to be top coated should be primed with
epoxy anti corrosive primer or PU Steel
Primer.
· It should be cleaned, free from dust, oil, grease
and other contaminants to ensure a good
adhesion.
Wood:
· Substrate should be primed with either
polyurethane or polyester primer.
· It must be sanded with sandpaper grit # 400 –
600 prior to the application of ACRYLIC
FINISH GLOSS HJ085.
Recommended Systems:

Steel

HJ basecoat

-1 Coat.

 

HJ HB

-1 Coat.

 

PU Primer # 157

-2 Coats.

 

ACRYLIC FINISH GLOSS HJ085

-1 Coat.

 

Wood

PU Primer # 153

-2 Coats.

 

ACRYLIC FINISH GLOSS HJ085

-1 Coat.

 

HJ 350

-1 Coat.

 

ACRYLIC FINISH GLOSS HJ085

-1 Coat.

 

Storage:
Shelf Life of 12 months minimum if stored below 250C.
Cleaning of Tools:
All tools should be cleaned with Wash Thinner as soon
as possible.
Packing:
Available in 1 Usg, lit Pail, and 0lit Drum.
Physiological Hazards:
ACRYLIC FINISH GLOSS HJ085 does not contain
dangerous solvents, nevertheless, good ventilation in
working rooms is recommended as well as the use of safety
tools and equipment. The mixture, in its liquid state is
flammable and harmful if swallowed. If contact with eyes
occurs, cleanse with fresh water and seek immediate medical
advise.

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.