Acrylic Matte Flat Finish Supplier in China
Acrylic Matte Flat Finish paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Acrylic coating

Acrylic Multi-Purpose Primer
Acrylic Eggshell Floor Enamel
Acrylic Clear Coat
Acrylic Enamel For Interior Use

Acrylic Copolymer Exterior Flat Paint
Acrylic DTM Rust Resistant Coatings
Acrylic Elastomer Coating
Acrylic Copolymer Roof Coating
Waterborne Acrylic Enamel Undercoater
Acrylic High Infraed Heat Reflectivity Coating

Acrylic Finish Gloss
Acrylic Conversion Coating
Acrylic Metal Primer

Acrylic Patching Seam Sealer
Acrylic Conversion Coating
Two Pack Catalysed Acrylic Finish
Acrylic Elastomeric Wall Coating
Quick Drying Clear Urethane Alkyd Varnish
Aluminum Acrylic Coating Automotive Grade Acrylic Lacquer Topcoat
Baking Glossy Topcoat Based On Thermoset Acrylic Resin
Rapid Dry Pure Acrylic Coating
Acrylic Urethane Catalyzed Coating
Single Pack Acrylic Poly Siloxane Finish Coating

  

Acrylic Matte Flat Finish

PRODUCT SPECIFICATIONS:

Type

Sheen

Theoretical Spread Rate

Recommended Application

Thinner

Clean Up

Styrene Acrylic

Flat

300 - 400 Sq. Ft. Per Gallon*

Brush, Pad, Roller or Spray

Water

Soapy Water

Dry Time:

Tack Free: 30 Minutes

Recoat: 4 Hours

Full Cure: 10 Days

PRODUCT NAME: FX-098100% Acrylic Interior Matte Flat Finish

Honest joy - Matte Flat Finish utilizes the latest in paint formulating technology to produce a stain-proof yet aesthetically pleasing interior wall coating. Honest joy finishes contain hard, ceramic micro-spheres. These together with the latest generation acrylic resins make the cured film impervious to household stains, which can be readily removed with common household cleansers. Low in odor, quick drying and absolutely spatterless, Honest joy - Matte Flat Finish flows naturally and smoothly and can be applied easily by the professional as well as the occasional painter. It imparts a truly flat finish, yet will withstand repeated scrubbing. Honest joy - Matte Flat is available in an unlimited array colors.

WHE TO USE:

Drywall Plaster Masonry Metal Wood

Honest joy - Matte Flat Finish can be used on virtually all interior surfaces where a durable, flat finish is desired. It is recommended for use in residential as well as institutional and commercial environments. Typical applications would be on walls, woodwork, ceilings, ductwork, partitions in homes, offices, schools, hospitals, shopping centers, common areas, etc.

SURFACE PREPARATION:

Surface to be painted must be clean and free of dirt, wax, rust, mildew, grease or loose, flaking paint. Patch all cracks, chips, nail holes and gouges using an appropriate patching compound. Dirt and chalk should be removed by scrubbing with warm, soapy water and thoroughly rinsed with clean water. Wax should be removed with a commercial wax stripper or by solvent cleaning. Grease should be cleaned by using Honest joy I. Rust must be removed by scrubbing with a solution of one (1) part household bleach and three (3) parts water. Rinse thoroughly with clean water and allow it to dry. Remove loose paint by scraping. Feather sand rough edges to insure a smooth finish coat. Glossy surfaces must be dulled by lightly sanding. Remove sanding dust before paint application. Any exposed substrate or patches should be spot primed with the appropriate primer.

PRIMING:

New or Bare Surfaces: Plaster/Drywall - For best results use Honest joy Multi-Purpose Primer/Sealer 2110-11; however, two un-thinned coats of Honest joy Matte Flat Finish will provide satisfactory results. Wood - Use Honest joy Multi-Purpose Primer/Sealer 2110-11. Masonry -Use Honest joy Masonry Sealer 48-11. Ferrous Metal -Use Honest joy Acrylic Metal Primer 36-11. Galvanized/Aluminum - Use Honest joy Multi-Purpose Primer/Sealer 2110-11.

APPLICATION:

Stir product with a circular, lifting motion before you begin to paint. Honest joy - Matte Flat Finish may be applied by brush, roller, pad or spray. For roller application use a 3/8" or 1/2" nap cover for smooth surfaces, a 3/4" nap cover for semi-rough surfaces and a 1" nap cover for rough surfaces. For best brush application results use a quality brush with a synthetic filament. If applying by airless spray, a .017 to .021 size tip will produce the best results. For spray application, Honest joy -Matte Flat Finish may be thinned with clean water, up to 15% if necessary. The addition of paint additives is not recommended. Apply when surface, ambient and material temperatures are over 50º F.

*NOTE ON SPREAD RATE:

Actual spread rate will vary based upon numerous factors, including texture of the substrate, application method, waste, surface porosity and thinning. The Theoretical Spread Rate listed on this document has not taken into account these factors and is only based upon the volume solids of this product and the recommended wet film thickness when applied to a smooth substrate.

RESIN TYPE:

Styrene Acrylic

SOLIDS:

Wt:

62.6 ± 1.0%

Vol.:

45.4 ± 1.0%

WEIGHT P GALLON:

12.2 lbs.

VISCOSITY:

90 - 95 KU

FLASH POINT:

0º F. and greater (TT-P-141, Method 4293)

SPECULAR GLOSS:

0.8 - 1.0 units @ 85

SAG RATING:

Pass 9 mils

REC. FILM THICKNESS:

Wet:

4.0 to 5.3 mils

Dry:

1.8 to 2.4 mils

LIGHT REFLECTANCE:

89%

TEST DATA:

 

 Scrubability:

ASTM-D2486 - 1,000 Cycles

 Flow & Leveling:

ASTM-D4062-9

CAUTIONS:

 

 

WARNING!

 

HARMFUL IF INHALED.

 

Keep away from heat and flame.

 

Use only with adequate ventilation. Ensure fresh air entry during application and drying. If you experience

 

eye watering, headache or dizziness or if air monitoring demonstrates vapor/mist levels are above applicable

 

limits, wear an appropriate, properly fitted respirator during and after application. Follow

 

manufacturer’s directions for respirator use. Wash thoroughly after handling.

 

If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced,

 

get medical attention immediately.

 

Obtain and read the MSDS prior to using this product.

 

KEEP OUT OF REACH OF CHILDREN

VOC/VOS STATEMENT:

This product contains a maximum of 100 grams of VOC/VOS per liter of coating. (.83 pounds per gallon).

CATEGORY:

This product is compliant under the Transport Commission regulations as a Flat Coating.

FEDAL SPECS:

Meets the performance requirements of Class I

LIFETIME WARRANTY:

SATISFACTION GUARANTEED:

 

Your satisfaction is guaranteed for as long as you live in your home when you use Honest joy Ultra

 

Premium Finishes. This warranty covers paint that is applied according to label directions on a properly prepared surface. If this paint fails to perform as warranted, return any unused portion along with your receipt in exchange for your money back or an equivalent amount of new paint. This warranty excludes failure due to structural defects, improper surface preparation or failure of previously applied coatings.

 

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.