Acrylic Water borne Paint Supplier in China
Acrylic Water borne Paint paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Waterborne Coating

Waterborne Satin Enamel
Water-Borne Premium Quality Acrylic Primer
Water-Borne High Performance Interior Acrylic Primer Undercoat
Two-Part Water-Borne Linear Polyurethane Enamel

Water-Borne Epoxy Primer
Water Reducible Urethane Primer
Water Reducible Enamel
Water Miscible Epoxy Coating
Water Borne Inorganic Zinc Rich Silicate Primer
Two-Component Water-Borne Epoxy Primer

Water Based Two-Component Epoxy Polyamide Finish
Water-Borne High Performance Acrylic Metal Primer
Water Based Gloss Epoxy Enamel

Urethane Modified High Solids Water Borne Coating
Water-Borne High Performance Acrylic Metal Primer
Water Borne Acrylic Protective Coating
Arylic Thermo Plastic Waterbase Finish
Self-Levelling Epoxy Flooring Water Borne
Acrylic Water borne Paint Eggshell Waterborne Interior Paint
Environmentally Friendly Waterborne Metal Primer
Fast Drying Interior Exterior Primer
Acrylic Water borne Paint
High Gloss Waterborne Aliphatic Polyurethane Enamel

  

Acrylic Water borne Paint

PRODUCT SPECIFICATIONS:

DESCRIPTION:
Water-borne acrylic paint for interior and exterior use. Almost odorless, friendly
to the public health, ideal for the painting of kids bedrooms, schools, hospitals. It could
be applied on properly prepared new or old painted with waterborne or solvent-borne
paints surfaces, such as wood, walls, gypsum-board, aluminum, copper, galvanized
surface, polyester, primed metal, hard PVC or glass. It has good workability, good
leveling, high coverage, easy and fast application. It resists frequent soap washing,
chalking and yellowing. It is available in gloss and satin finish.
CHARACTISTICS:
No yellowing tendency, even in closed places
Almost odorless, ideal for indoors and outdoors
Excellent elasticity and durability
Ideal for the recoat of indoor surfaces due its strong adhesion
Very good flow and leveling, good workability and high spreading rate
High coverage and perfect finish
Easy and fast application, thus labor cost reduction
Creation of numerous shades through tinting system
TECHNICAL DATA:

SPECIFIC GRAVITY (Kg/l)

Gloss: Satin:
White: 1.24 (±0.02) Bases: 1.04-1.21 White: 1.32 (±0.02) Bases: 1.09-1.26 {ISO 2813}

SOLIDS P VOLUME (%)

Gloss: 46.6 Satin: 47.5 {ISO 3251}

VISCOSITY (cP)

4.500-8.500

pH

8.7-9.1

GLOSS

Gloss: 73-78 (observation angle 60º) Satin: 23-28 (observation angle 60º) {ISO 2813}

WHITENESS INDEX

White: Gloss: > 90 Satin: > 90

YELLOWNESS INDEX

White: Gloss: = - 0.4

 

Satin: = - 0.4

CONTRAST RATIO

CR > 95

VOLATILE ORGANIC COMPOUNDS, VOCs (g/l)

Gloss: 29.3 Satin: 28.4

SPREADING RATE (m2/l)

13*

READY TO BE WASHED

28 days after the application

WASHABILITY

>000cycles {ASTM D2486/ DIN53778}

STORAGE TIME

1 year at least

* due to the surface absorption, the conditions and the application method
SURFACE PREPARATION & APPLICATION:
In order to be accomplished adhesion between coating and surface, the surface
must be dry and clean, free from dust, old paints, grease, rust, salts

APPLICATION DIRECTIONS:
Tools: brush (synthetic), roller, air gun or airless (with nozzle 1.8mm-2.0mm)
Thinning: 5-7% with water
Surface drying time: 2-4 hours, at temperature 25ºC, relevant humidity <
50%
Minimum recoat time: 8-12 hours
• Stir before use and during the application
• The application must take place at temperature between 10 – 35 ºC and 65%
relevant humidity 65 %
PACKAGING:
White paint: 0.75lt, 2.5lt.
Bases : 1lt, 3lt, 9lt. They could be tinted with the tinting system creating
3000 shades. tinting system indicates which paint-base should be used for the
creation of a specific shade, ensuring the quality of the paint.
DIRECTIONS FOR SAFETY USE:
Keep out of the reach of children. In case of contact with eyes, rinse
immediately with plenty of water. In case of swallowing, do not cause vomiting, but
seek medical advice. For more information, advise the material safety data of this
product.
• It does not contain lead or mercury
STORAGE:
�� THE PRODUCT MUST BE STORED AT TEMPATURES BETWEEN
5°C AND 35°C AND RELEVANT HUMIDITY <50%.
�� The tin must be tightly closed.

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.