Alkyd Semigloss Finish Supplier in China
Alkyd Semigloss Finish paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Alkyd coating

Urethane-Modified Alkyd Primer
Urethane Alkyd Enamel
Urethane Alkyd Based Toopcoat
Epoxy Ester Modified Alkyd Primer

Superior Quality Alkyd Glaze
Speedy-Dry Alkyd Enamel
Silicone Modified Alkyd Enamel
Semi-Transparent Organic Solvent Stain
Rust-Inhibitive Patented Acrylic Modified Alkyd Enamel
Quick-Drying Styrenated Alkyd Paint

Alkyd Urea Clear Coat
Transparent Modified Alkyd Sealer
Alkyd Semigloss Finish
Transparent Modified Alkyd Sealer
Quick Drying Modified Alkyd Based Primer
Rust Preventing Primer
Quick Drying Clear Urethane Alkyd Varnish
Versatile Finish Coat Based On Long Oil Alkyd Resin Exceptionally Durable Fast Drying Alkyd Paint
Fast Dry Alkyd Metal Primer
Alkyd Gloss Enamel
High Gloss Alkyd Aluminum Paint
Alkyd Baking Enamel

  

Alkyd Semigloss Finish

PRODUCT SPECIFICATIONS:

DESCRIPTION
Premium quality alkyd Semigloss finish designed for interior/exterior application on multiple substrates in residential, commercial and industrial areas which provides good durability.
RECOMMENDED USES
For use over prepared substrate such as steel, aluminum, galvanizing, plywood, concrete block, brick, plaster and masonry for decorative and industrial maintenance.
CHARACTISTICS
Color:
Wide range of colors available
Finish:
Semigloss
Volume Solid:
43% + 2%
Specific Gravity:
1.25 KGs / ltr
Recommended DFT:
30 Microns
Spreading Rate@DFT:
14.33 m2 / ltr or
54.25 m2 / gallon
Flash Point:
40 oF
Drying Schedule:
@ 25 oC/R.H.50
Dry to Touch:
2 Hours
To Handle:
6 Hours
To Recoat:
12 Hours
Shelf Life:
18 months, unopened at 25 oC
Reducer/Clean Up:
Paint thinner HJ-09
APPLICATION PROCEDURES
Surface Preparation: Surface must be dry, clean and in sound condition. Remove oil, dust, dirt, millscale or other foreign substance to ensure good adhesion. Minimum surface preparation methods to be followed for (1) Iron and Steel – SSPC-SP2 or SP3 (2) Aluminum and Galvanizing – SSPC-SP1 (3) Concrete should be cured, dry and clean. Allow weathering of new galvanized steel for six months prior to coating.
Application Methods:
Conventional Spray:
Reduce 5% with thinner
Airless Spray:
Reduce as required for suitable spray
Brush/Roller:
Reduction not recommended
SYSTEM RECOMMENDATION
Iron, Steel, Aluminum, Galvanized Steel:
Recommended Primer
1 Coat
As Recommended
Alkyd Semigloss Enamel
2 Coats
30 Microns DFT
per coat
Primers Recommended:
• Anti-Rust Metal Primer
• Red Oxide Metal Primer
• Tile Clad II Primer
• Zinc Chromate Primer
Plaster Wall & Wood Finish:
Wall & Wood Primer or
Acrylic Primer Sealer
1 Coat
50 Microns DFT
25 Microns DFT
Acrylic Latex Putty Int.
1 Coat
250 Microns DFT
Enamel Undercoater
1 Coat
50 Microns DFT
Alkyd Semigloss Enamel
2 Coats
30 Microns DFT
per coat
Concrete Blocks:
Recommended Primer
1 Coat
As Recommended
Heavy Duty Block Filler or
Acrylic Latex Putty Int.
1 Coat
1 Coat
250 Microns DFT
250 Microns DFT
Recommended Primer
1 Coat
As Recommended
Alkyd Semigloss Enamel
2 Coats
30 Microns DFT
per coat
Primers Recommended:
• Acrylic Primer Sealer (S)
• Wall & Wood Primer
• Enamel Undercoater
*For further information on recommended products please refer to Honestjoy System Guide.
**For further information on surface preparation methods and application procedures please refer to Honestjoy Surface Preparation bulletin

SAFETY PRECAUTIONS
Spray under well-ventilated conditions. Do not breathe or inhale mist. When spraying, wear air mask. Avoid skin contact. Spillage on skin should immediately be removed with suitable cleanser, soap and water. Eyes should be flushed with water and medical attention sought immediately.

 

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.