Chlorinated Rubber Micaceous Iron Oxide coating Supplier in China
Chlorinated Rubber Micaceous Iron Oxide coating paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Vinyl Coating

Chemical Resistant Chlorinated Rubber Based Enamel
Chlorinated Rubber Based Anti-corrosive Primer
Chlorinated Rubber Swimming Pool Paint
Chlorinated Rubber Enamel

Chlorinated Rubber High Build Coating
Economical Anticorrosive Chlorinated Rubber Based Primer
Tintable Chlorinated Rubber Finish
Polychloroprene Rubber Solvent Based Primer
Phisically Drying Modified Chlorinated Rubber Based Primer
General Purpose Chlorinated Rubber Primer
Chlorinated Rubber Intermediate Coating

Chlorinated Rubber Micaceous Iron Oxide coating
Premium Quality Full-bodied Smooth-flowing Vinyl-acrylic Primer
Abrasion Resistant Vinyl Ester Coating
Catalyzed Vinyl Ester Primer
Chlorinated Rubber Based Intermediate Coat

Chlorinated Rubber MIO Intermediate Coating

  

Chlorinated Rubber Micaceous Iron Oxide coating

PRODUCT SPECIFICATIONS:

Product Description
MIO is high performance high build chlorinated rubber based coating pigmented with
micaceous iron oxide (MIO) pigment. MIO is a lamellar plate-like pigment that forms a thick lustrous layer
after application. As the coating dries, the very thin platelet shaped pigment particles orient themselves
parallel to the substrate to give an armoured effect to the film and also act as an impediment to the
diffusion of oxygen and moisture through the film. It is ideal for use in marine and chemical environments.
Features and Benefits:
· Easy to apply and can be applied via airless spray, conventional spray and brush.
· Can be used as primer, intermediate or finish coat.
· Renders hard, inert film showing excellent resistance towards dilute acids, alkalis, certain salts,
oxidizing agents, aliphatic hydrocarbons, alcohols, mineral oils, greases etc.
· Has very high resistance to permeability of water, moisture, oxygen and other atmospheric
pollutants.
· Suitable for varied end applications i.e. ideal for high humidity, moisture, marine atmospheres,
heavy rains, high temperatures, damp conditions, very dusty and fungus prone conditions.
· Impart excellent inter-coat adhesion properties.
· Extremely durable and weather resistant.
· Non-toxic and cost-effective

Recommended uses:

 

Fertilizer plants

Sewage farms

Concrete Storage Tanks

Water Treatment Plants

Structural Steel

Galvanized Iron

 

Breweries

Bleacheries and laundries

Pulp and Paper Mills

Chemical Plants

Marine and shore installations

Swimming Pools

Food Processing Plants

Areas of excessive moisture

Petro-chemical Plants

Refineries

Surface Preparation:
Steel - The surface should be blast cleaned to SSPC-SP 10-63T . loose rust and scales,
dirt, grease, oil, paint, wax, weak oxide films and other contaminants should be removed. It means that at
least 95% of any given square inch has the appearance of white metal and the remainder is limited to slight
discolourations. Blast cleaning to SSPC-SP 5-63 is recommended where heavy corrosive
conditions exist. That means a surface with a grey metallic colour, slightly roughened to form a suitable
anchor pattern for coatings. This surface is free of all oil, grease, dirt, mill scale, rust, corrosion products,
oxides, paint and other foreign matter. In absence of blast cleaning, prepare the metal surface by wire
brushing, sanding, grinding, scrapping or chipping with hand or power tools. Remove all the contaminants.
Apply one or two coats of HJ-500 primer. Then apply a coat of MIO followed by 2-3
coats of HJ-070 Chlorinated Rubber Enamel.
Galvanized Iron - Remove dirt, dust, oil, old paint etc. Degrease the surface with degreasing solvents like
xylene or tri-chloroethylene. Apply one coat of HJ-112 Wash Primer for obtaining maximum
adhesion. Apply one coat of HJ-500 primer. Then apply a coat of MIO

 

TECHNICAL DATA

Name/Description

MIO

Type

Single pack cold cured

 

 

Composition

Chlorinated rubber / MIO

Colour

Brownish Grey

Finish

Smooth and Matt

 

 

Volume Solids

45 ± 3%

Dry film thickness per coat

65 to 75 microns

Coverage-(theoretical-no loss)

6.9 to 6 m² /litre

Serviceability @ 30° C

 

- Dry to touch

30 - 45 minutes

- Re-coat by Spray

3-4 hours

- Re-coat by Brush

16 -24 hours

- Full Cure

7 days

Relative Humidity

90%

 

Application Temperature

 

- minimum

4° C

- maximum

35° C

 

 

Dry heat resistance

65° C

 

 

Solvent/Thinner

Specified thinner

Flash Point

25° C

Packing

4 & litres

Shelf Life

6 months

 

Flammable. Keep away from heat and open

Precaution

flame. Maintain good ventilation and avoid

 

breathing vapours.

Product Limitations:
· MIO is not resistant to most solvents, animal and vegetable oils and fats common in dairies,
packinghouses and sewage treatment facilities.
· Do not use on floors.
· Epoxy and polyurethane topcoats are not suitable.
Notes:
· Brushes and spray equipments should be cleaned with Specified thinner.
· The contents should be stirred thoroughly prior to use.
· When overcoating the weathered or aged MIO, ensure that the coating is fully free from all
contamination such as oil, dust, grease, stains etc.
· This coating should always be thinned with Specified thinner. The use of alternative thinners can
severely inhibit the curing mechanism of the coating.
Disclaimer:
Information provided herein is based upon tests believed to be reliable. It does not guarantee the results to
be obtained. Nor does it make any express and implied warranty or merchantability, or fitness for a
particular purpose concerning the effects or results of such case. It does not release you from the
obligation to test the products supplied by us as to their suitability for the intended uses. The application,
surface preparation and use of the products are beyond our control and, therefore, entirely your own
responsibility.

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.