Coating for Die Casting Aluminum Galvanize and Steel Parts Supplier in China
Coating for Die Casting Aluminum Galvanize and Steel Parts paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Other coating

Concrete Repair Coatings
Easy Sanding Clear Lacquer Sealer
Hydraulic Fluid Resistant Non-slip Finishes
Highly Reflective Marking Paint

Waterborne Thermosetting Glass Paint
Unsaturated Polyester Glass Flake Putty Coating Paint
Coating for Die Casting Aluminum Galvanize and Steel Parts
Semi-Transparent Organic Solvent Stain
Polyester Epoxy Coil Coating
Hard Abrasive And Weather-Resistant High Gloss Marine Varnish

Alkyd Urea Clear Coat
Concrete Aluminum And Steel Marine Structure Epoxy Coating
Zinc Rich Epoxy Powder Coating

Epoxy Powder Coating
Concrete Aluminum And Steel Marine Structure Epoxy Coating
Water Chemical Resistance Tin Lining Coating
Aqua-Loc Ceramic Topcoat
Removable Petroleum-Based Liquid Barrier Coating
Semi-Gloss Precatalyzed Lacquer
Premium High Build Precatalysed Timber Lacquer
Rapid Dry Gloss Enamel
Temperature Indicating Paint
Two Component Oxirane Ester Paint Containing Active Anti-Corrosive Pigments
Molybdenum Disulfide Slick Lubricant Coating

  

Coating for Die Casting Aluminum Galvanize and Steel Parts

PRODUCT SPECIFICATIONS:

Polyamide Epoxy Strontium Chromate Primer is a two component primer that protects metal from
corrosion. It is formulated completely from pure epoxy resins, with no added diluents, for superior
performance. This primer is resistant to solvents and chemicals, performs well against abrasion and is
flexible.
FINISH:
Flat
USES:
Aluminum Galvanized Metals Equipment
Steel Water Immersion Machinery
Iron Marine Environments Chemically Aggressive Atmospheres
FILM PROPTIES:
Air Dry Time 6 To 12 Hours @ 77ºF
Re-coat Time 4 To 12 Hours @ 77ºF
Complete Cure 7 Days
Times may vary depending on temperature and humidity.
BAKE SCHEDULE:
Flash dry for 15 minutes before baking.
150ºF For 60 Minutes
0ºF For 45 Minutes
250ºF For 30 Minutes
APPLICATION:
350 Square Feet per Gallon @ 2 Mils
325 Square Feet per Gallon @ 3 Mils
Apply with brush, spray or roller.
Sandblast the substrate to white metal.
MIXING RATIO AND POT LIFE:
3 Parts to 1 part catalyst. After adding the catalyst to the Epoxy base, mix thoroughly and
allow to set for 1 hour before using and thinning. After adding the catalyst and inducting for one hour, the
pot life is approximately 8 hours @ 77ºF.
THINNING AND CLEANUP:
HJ-209

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.