Fast Drying Concrete Floor Paint
A quick drying solvent-borne decorative finish for interior use on concrete floors in light traffic areas eg. shops
Packaging 5 litre
Drying Time Under normal drying conditions surface dry in 1 hour, recoatable after 6 hours. Allow for
adequate ventilation during the drying period. Recoat within 48 hours.
Pigment: Titanium Dioxide, coloured pigments and extenders.
Resin: Alkyd and Urethane.
Solvent: White Spirit.
Spreading Rate 16m² per litre on smooth surfaces.
Wet Film Thickness 62 micrometres at 16m² per litre.
Dry Film Thickness 30 micrometres at 16m² per litre.
Volume Solids 48% Red, other colours will vary.
Flash Point 40oC (closed cup).
VOC Content limit value for this product (cat.A/i): 600 g/l (07) / 500 g/l (10) This product contains
max. 499 g/l VOC.
Limitations For interior use only. Do not apply when air or substrate temperatures are likely to fall below
5ºC or when the relative humidity is above 80% during application or the drying period.
New Surfaces All surfaces must be sound, clean, suitably dry and free from anything that will interfere with
the adhesion of the materials to be applied. Remove any site debris and sweep floor clean.
Any oil or grease from site plant/works must be removed with an emulsifying de-greaser in
accordance with the manufacturer's instructions. Floor areas to be coated should be acid
etched to remove surface laitance, using a proprietary mortar cleaner diluted in accordance
with the manufacturer's instructions. Rinse thoroughly with clean water to remove all
residues. Allow to dry. Prime all areas to be coated with one coat of Honest Paint Fast
Drying Concrete Floor Paint, thinned up to 15% by volume with clean dearomatised white
Previously Decorated Surfaces All surfaces must be clean, dry and free from anything that will interfere with the adhesion of
he materials to be applied. Remove loose and failing material by scraping or brushing with a
stiff bristle brush to a sound edge. Any oil, grease, polish etc must be removed with an
emulsifying de-greaser in accordance with the manufacturer's instructions. For surface dirt,
wash with hot water and liquid detergent solution to remove any contaminants, frequently
changing the water. Rinse thoroughly with clean water to remove all residues. Allow to dry.
Feather edges of sound coatings and mechanically dry abrade any glossy surfaces to provide
a key. Remove all dust by vacuum cleaning. Patch prime all bare areas (including any areas
of making good) with one coat of Honest Paint Fast Drying Concrete Floor Paint, thinned up
to10% by volume with clean dearomatised white spirit. Bring forward patch primed areas
with one coat of Honest Paint Fast Drying Concrete Floor paint within 48 hours of drying.
COATING SYSTEM Apply two coats as required. Maintain a wet edge. The second coat must be applied
within 48 hours
APPLICATION Stir well before use. Apply by brush or roller.
CLEANING Return surplus material to container. Clean with a proprietary cleaner immediately
HEALTH AND SAFETY Please refer to the Safety, Health and Environmental Information on the container. Take
special precautions during the surface preparation of pre 1960’s painted surfaces as they
may contain harmful lead. For further information contact the Honest Paint Customer
Relations Team. When preparing all surfaces avoid the inhalation of dust and/or metal
particles. Wear a suitable facemask. Material Safety Data Sheets for this and all other Honest Paint
products are freely available from the place of purchase or the address below. Store in
secure dry conditions inaccessible to children or animals. Containers should be kept closed
during storage. Do not empty into drains, watercourses or access routes to septic tanks.
GENAL INFORMATION Under normal and frost free conditions this product will remain usable for up to two
years if stored correctly and unopened.
Every care is taken to ensure that all information provided on this Technical Data Sheet is
accurate. We are unable to guarantee results as it has no control over the conditions
under which its products are applied.