Fouling Release Tiecoat Supplier in China
Fouling Release Tiecoat paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Fire proof retardant heat resistance coating

VOC Compliant Air Drying Silicone Based Heat Resistant Coating
Two-Component State-OF-The-Art Silicone Coating
Fouling Release Tiecoat

Single Component High Heat Aluminum Coating
High Heat Resistant Black Coating
Silicone Based Heat Resistant Coating
Quick Drying Heat Resistant Aluminium Enamel
Aluminium Heat Resistant Pure Silicone
Air Drying Self-Priming Heat And Corrosion Coating

Compliant VOC High Build Modified Silicone Coating
Solventborne Silicone Coating
Heat Reflective Ceramic Coating

General Purpose Aqueous Based Fire Retardant Surface Coating
Solventborne Silicone Coating
Air Drying Self-Priming Heat And Corrosion Coating
One-Coat Aluminum Fire Resistance Coating
Coloured Heat Resistant Acrylic Silicone
Fire Retardant Coating

  

Fouling Release Tiecoat

PRODUCT SPECIFICATIONS:

Description: FY-312 is a high solid three component silicone based product.
Recommended use: As a tie coat for the fouling release System, securing adhesion between
the anticorrosive system and the Fouling Release topcoat.

PHYSICAL CONSTANTS:
Colour/Shade nos: Black/19990 - Grey/130
Finish: Semi-gloss
Volume solids, %: 70
Theoretical spreading rate: 5.8 m²/litre - 1 micron
234 sq.ft./gallon - 4.8 mils
Flash point: 27°C/81°F
Specific gravity: 1.3 kg/litre - 10.8 lbs/gallon
Dry to touch: 2 hours at °C/68°F
Fully cured: 7 days at °C/68°F
V.O.C.: 265 g/litre - 2.2 lbs/gallon
Shelf life: 1 year (25°C/77°F) from time of production. Depending on storage conditions,
mechanical stirring may be necessary before usage.
If the shelf life is exceeded please contact Honestjoy for further advice.

APPLICATION DETAILS:
Mixing ratio: Base coat: Curing Agent: Additive
69 : 21 : 10 by volume Thinner FY-009
Application method: Airless spray Brush/roller (touch-up)
Thinner: No thinning
Nozzle orifice: .019"-.021"
Nozzle pressure: 150 bar/20 psi
(Airless spray data are indicative and subject to adjustment)
Cleaning of tools: FY-009
"Pot life": 1 hour (°C/68°F)
Indicated film thickness, dry: 1 micron/4.8 mils
Indicated film thickness, wet: 175 micron/7 mils
Recoat interval, min: 6 hours (°C/68°F)
Recoat interval, max: 24 hours (°C/68°F)
Safety: Handle with care. Before and during use, observe all safety labels on packaging and
paint containers. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
SURFACE New construction: According to painting specification/product data sheet for the specified

Maintenance, non-F/R systems: This is feasible provided the general condition of the old paint
system is good and very thorough cleaning is carried out.
Spot repair is to be carried out with specified system. A “bridge coating” is
subsequently used as full coat before application of FY-312.
Maintenance, old F/R systems: Possible spot repair with specified system followed
by spot application of FY-312.
In any of the above-mentioned cases, a detailed working specification is available upon request.
APPLICATION Use only where application can proceed at temperatures above 10°C/50°F. The temperature of
CONDITIONS: the surface and that of the paint itself must also be above this limit. Apply only on a surface with a
temperature above the dew point to avoid condensation. The surface should be clean and dry.
In confined spaces provide adequate ventilation during application and drying.

COAT:

COAT:
REMARKS: It is of the utmost importance that thorough protection and cleaning procedures are followed
before and after application respectively. It is advisable to apply this system after all other
exterior painting is complete. This is to avoid silicone contamination of other painted surfaces.
Before application cover all surfaces surrounding the areas to be applied with plastic sheeting to
avoid overspray. After application clean all equipment thoroughly, before re-using equipment. See
below.
Volume solids: The stated value is the theoretical volume solids: solid content of the mixed product. Due to the
chemical reaction in the mixture the practical volume solid will be approx. 5% lower than indicated.
Mixing: Add ADDITIVE while stirring. Immediately after add CURING AGENT
and mix.
“Pot life”: The pot life is 1 hour at °C/68°F. No change in the paints physical properties (e.g. viscosity
increase) is apparent when this time is exceeded. It is important that the paint is no longer used
as its adhesion properties to the preceding coat are dramatically reduced after that time.
Application method: A well executed spray application is necessary. This paint material has special application
properties and it is recommended first to make a small-scale application to get familiar with the
properties.
Thinning: Not recommended. In exceptional cases use FY-009 (max 5 vol.%).
Recoating by itself: FY-312 must be applied in one coat.
In case FY-312 has to be recoated by itself, application must be wet in wet.
Weather conditions: Please refer to application manual.
Cleaning of tools: Very thorough cleaning with FY-009 is necessary. DISPOSE OF CLEANING SOLVENTS
AFT USE. DO NOT RE-USE SOLVENTS AFT CLEANING.
Storage of cans: Must be stored under absolutely dry conditions, protect against seeping humidity.

This Product Data Sheet supersedes those previously issued.

Data, specifications, directions and recommendations given in this data sheet represent only test results or
experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or
appropriateness under the actual conditions of any intended use of the Products herein must be determined
exclusively by the Buyer and/or User.
The Products are supplied and all technical assistance is given subject to Honestjoy's GENAL CONDITIONS OF
SALES, DELIVY AND SVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller
disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence,
except as expressed in said GENAL CONDITIONS for all results, injury or direct or consequential losses or
damages arising from the use of the Products as recommended above, on the overleaf or otherwise.
This Product Data Sheet supersedes those previously issued.

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.