Heat Resistant Coating Supplier in China
Heat Resistant Coating paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Epoxy Coating

Structural Steel Epoxy Primer
Structural Steel Epoxy Top Coat
Epoxy Sealer
Floor Coating
Silane Penetrating Sealer
Primer
Epoxy Protective Coating
Flexible Epoxy Coating
Touch-Up Epoxy Rebar Coating
Moisture Tolerant Epoxy Primer
Corrosion Resistant Coating
Heat Resistant Coating
Elastomeric Cement Coating
Glass Flaked Epoxy Coating
Breathable Masonry Coating


  

Heat Resistant Coating

PRODUCT SPECIFICATIONS:

Heat Resistant Coating is a single component high performance heat resistant coating. FX-465 is easy to use and gives years of protection in corrosive environments and will with- stand temperatures up to 750°F (398.9°C). FX-465 offers good chemical resistance and color retention in severe conditions. FX-465 is typically used on steel surfaces but also on ceramic insulators, heat exchanger and water boxes. ADVANTAGES: FX-465 is one component for easy application FX-465 can be applied by brush, roller or spray FX-465 resistant up to 750°F (398.9°C) FX-465 protects all types of finned tubes. Coils used for oil, water, air, gas and process cooling and heating, as well as large condensing coils, can be protected against damaging environments. PHYSICAL PROPTIES: Shelf life 1 year Solids 53 % by volume minimum Air Dry Tack Free 45 Minutes Full Properties After heating to 350°F one hour Salt Spray (2 hours) ASTM D1654 500 hours Passes Color Black or Standard Gray Other colors available upon request SURFACE PREPARATION: Steel Surfaces: Steel surfaces should be dry grit or sandblasted to a commercial gray metal finish as specified by the Steel Structures Painting Council Specification 551. All work blasted in one day should be coated the same day. FX-465 Zinc Rich is available to give excellent corrosion resistance with a high temp coating. APPLICATION: FX-465 can be applied by brush, roller or spray. Thinning is not necessary for spray application. Apply at 5 mils wet two coats; allow 2 hours before application of second coat at 75°F. When spraying, NIOSH approved organic vapor respirator should be worn to eliminate solvent dangers. Chemical crosslinking begins at 180°C. For high temperature resistance curing is recommended for 45 minutes at 250°C. WHE TO USE: Exhaust tubes, chimneys, industrial equipment, ceramic insulators, water boxes, where high temperature resistance is required. COVAGE: 300-350 sq. ft. per gallon (one coat 5 mils WFT and 3 mils DFT). PACKAGING: FX-465 is packaged in (1) gallon and five (5) gallon pails. CAUTION: Flammable Liquid! Contains Xylene. Avoid inhalation of vapors. FX-465 can be irritating to eyes, skin and upper respiratory tract. Wear protective clothing, rubber gloves and safety glasses. When spraying, respiratory protection and good ventilation are required. FIRST AID: In case of contact, wash thoroughly with soap and water. Flush eyes with copious amounts of water. Consult a physician if irritation persists

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.