High Heat Resistant Black Coating
A high heat resistant, flat black coating for temperature resistance in the range of 600-650o C . This product has low
sheen and is durable, mar resistant and fast drying. It has low reflectance and excellent adhesion.
Use on wood burning stoves, stacks, barbecues, heat exchangers, kilns, boilers, breechings, turbine housing, and
piping in industrial plants. This product must reach a minimum 300 C for maximum cure.
Methods of Application
AIRLESS SPRAY Speeflo Atlas 30:1 with tip sizes .013" - .015" or equivalent
BRUSH / ROLL Brush and Roll small areas only.
Drying Time - Temperature, Relative Humidity, and Film Thickness will affect dry and re-coat times.
Use self Priming for steel applications.
All surfaces must be clean, dry and free from any contaminants. An SSPC-SP3 Power Tool Clean is the minimum
requirement. Maximum durability will be achieved after a heat cycle has been achieved. An SSPC-SP6 sandblast is
recommended for superior performance. HJ-831 Clova Zina is recommended as a primer in corrosive environments.
Mix well before and during use. Keep containers tightly closed when not in use.
This product is for industrial use only. Refer to Material Safety Data Sheet for proper health and safety information.
Storage and Handling
6 C (T.C.C.)
8.87 lbs/gal (container extra)
Store in a cool, dry, secure location.
1 gallon cans, 5 gallon pails.
Some package sizes or colors may be by special order only. Please check with us when ordering.
. In the event that this product is defective or in any way unsuitable for the application for which it is sold, we
will replace the product free of charge. The warranty provided by this data sheet is the only warranty or guarantee of quality made in respect of this product by Honest joy.