Modified Alkyd Based Anticorrosive Red Oxide Metal Primer Supplier in China
Modified Alkyd Based Anticorrosive Red Oxide Metal Primer Coating paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Red Oxide Primer

Chlorinated Rubber Red Oxide Primer
Epoxy Micaceous Iron Oxide Coating
Micaceous Iron Oxide Pigmented Two-Pack Epoxy Coating
Modified Alkyd Based Anticorrosive Red Oxide Metal Primer
Drying Oil Gray Oxide Primer
Oil Red Oxide Primer
Red Oxide Rust Preventative Primer
Red Oxide Finish
Lead Free Red Oxide Primer
Red Oxide Quick Dry Primer


  

Modified Alkyd Based Anticorrosive Red Oxide Metal Primer

DESCRIPTION
A modified alkyd based anticorrosive red oxide metal primer designed for interior/exterior priming of metal. It provides a sprayable, fast drying and easy to sand smooth surface.
RECOMMENDED USES
For use over prepared steel, iron, aluminum, and galvanized metal.
CHARACTISTICS
Color:
Red Oxide
Finish:
Matt
Volume Solid:
45% +1%
Specific Gravity:
1.32 KGs / ltr
Recommended DFT:
50 Microns
Spreading Rate@DFT:
9 m2 / ltr or
34 m2 / gallon
Flash Point:
40 oC
Drying Schedule:
@ 25 oC/R.H.50
Dry to Touch:
1 Hour
To Handle:
24 Hours
To Recoat:
24 Hours
Shelf Life:
18 months, unopened at 25 oC
Reducer/Clean Up:
Paint thinner HJ-09
APPLICATION PROCEDURES
Surface Preparation:Surface must be dry, clean and in sound condition. Remove oil, dust, dirt, millscale or other foreign substance to ensure good adhesion. Minimum surface preparation methods to be followed for (1) Iron and Steel – SSPC-SP2 or SP3 (2) Aluminum and Galvanizing – SSPC-SP1. Allow weathering of new galvanized steel for six months prior to coating.
Application Methods:
Conventional Spray:
Reduce 10% with thinner
Airless Spray:
Reduce 10% with thinner
Brush/Roller:
Reduction not recommended
SYSTEM RECOMMENDATION
Iron and Steel:
Red Oxide Metal Primer
1 Coat
50 Microns DFT
Recommended Topcoats
2 Coats
As Recommended
Aluminum and Galvanized Metal:
Red Oxide Metal Primer
1 Coat
50 Microns DFT
Recommended Topcoats
2 Coats
As Recommended
Topcoats Recommended:
• Alkyd Enamel (Gloss, Semigloss, Flat Finish)
• Enamel Undercoater
• Hi-Build Aliphatic Polyurethane
• Epoxy
• Plastic Emulsions (Interior/Exterior)
• Sheracryl (Gloss, Semigloss, Flat, Clear)
• Weatherclad (Gloss, Semigloss, Flat Finish)

SAFETY PRECAUTIONS
Spray under well-ventilated conditions. Do not breathe or inhale mist. When spraying, wear air mask. Avoid skin contact. Spillage on skin should immediately be removed with suitable cleanser, soap and water. Eyes should be flushed with water and medical attention sought immediately.



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.