One-component Fast Drying High Build Anti-corrosive Primer Supplier in China
One-component Fast Drying High Build Anti-corrosive Primer Coating paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Fast Dry Cure,Fast Set Coating

Fast Dry Metal Primer
Rapid Drying Primer
Rapid Drying Copolymer Enamel
Quick Drying One-pack Flexible Primer

Quick Drying Synthetic Primer
Quick Drying Acrylic Primer
Quick Drying Acrylic Lacquer
Polypropylene Air Drying Single Pack Primer
One-component Fast Drying High Build Anti-corrosive Primer
Fast Drying Concrete Floor Paint
Fast Drying Industrial Finishing Enamel

Fast Cure Abrasion Resistant Coating
Fast Dry Fabrication Primer
All Purpose Fast Set Mortar
Fast Curing Enamel



  

One-component Fast Drying High Build Anti-corrosive Primer

Product Description

One-component, fast drying, high build, anti-corrosive primer, provides a highly
economical painting process.
Special features Used as the primer in a quick application system together with “Fast Drying Top-
Coat” for completing the painting process during one day.
Contains anti-corrosive pigments of zinc phosphate type and provides superior
protection against rust.
Enables application of a single 70 micron thick coat, thus saving the number of
primer coats and application costs.
Applied by spraying and brushing.
User and environment friendly.
Suggested uses For ferrous metal items, in an urban, light industry environment, such as bars,
constructions and metal for construction, and in the rail industry. Used as a
primer in a quick application system.
Technical data
Color Red oxide, dark grey, off-white, yellow oxide.
Gloss at 60ºC Matt.
Solid content by
volume
48±2%
Recommended dry
film thickness
30-60 microns.
Calculated
spreading rate* (sq.
m/liter)
8-16 (according to recommended dry film thickness)
Recommended
thinner
For spraying: 1-32; for brushing: 18.
Touch dry** 30 minutes.
Hard coat** 12 hours.
Dry to recoat 1 hour. To obtain maximal gloss, apply Fast Drying Top-Coat after 5 hours.
Storage
Shelf life** 24 months.
Surface preparation
and specification
Blast to Sa2.5 at least.
Where sandblasting is impossible, remove rust and loose layers mechanically,
to ST-3 . Remove any oils and foreign matter.
Paint system Primer: apply 1-2 coats of Fast Drying primer.
Top-coat: to obtain an especially quick application process, it is recommended to
use in combination with Fast Drying Top-Coat.
Paint application Method Pressure (atm.) Nozzle Orifice Thinner Thinning Volume (%)
Brush/roller 18 Up to 10%
Regular spray 2-3 1-32 Up to 15%
Airless spray 3-6 17-21” 1-32 Up to 7%
Cleaning thinner Thinner 1-32 or thinner 18.
Application remarks Stir well before application and while painting.
Caution Any work that includes application and use of this product shall be
performed according to the applicable Safety, Health and
Environmental regulations. Read the safety precautions and the
warnings specified in the Safety Data Sheet, available at Honest
Safety Department and indicated on the product’s label.
Keep away from fire and sparks. Inedible. Provide adequate
ventilation of the work space. Use appropriate protective means, as
indicated in the Safety Data Sheet.
Do not inhale fumes when spraying this product.
Warning Never mix this material with others when not specifically recommended by us.
General comments Data presented here is based on our best knowledge and experience. We
reserve the right to update and/or alter it without prior notice. Achievement of the
best desired results is subject to proper application in strict conformance to our
instructions and safety measures. Before application, the user should verify that
the product is indeed designed for the intended usage and that the surfaces to
be painted are properly prepared, and are suitable for the product’s application.
* Practical spreading rate can vary, depending on the surface, the
application mode, the painter’s skill and weather conditions at the
site. Assume approximately 75% of the calculated spreading rate.
** At 25ºC and 65% relative humidity.

Product Description Glossy, fast drying topcoat. Enables a highly economical painting process.
Special features Very fast drying top-coat for a short application process.
The quick drying prevents dust and dirt pick-up and provides a decorative look.
Applied by spraying and brush.
Minimal sagging and dropping.
Suggested uses Designed for quick and economical application, where the metal items must be
transported quickly. For ferrous metal items and constructions, in an urban, light
industry environment.
Technical data

Gloss at 60ºC 75±5% (glossy)
Solid content by
volume
45±2%
Recommended dry
film thickness
35-40 microns.
Calculated
spreading rate* (sq.
m/liter)
About 12 (depending on the color).
Recommended
thinner
For spraying: 1-32; for brush: 18.
Touch dry** 30 minutes.
Hard coat** 5 hours.
Dry to recoat Up to 1 - 4 hours, or after 16 hours.
To obtain maximal gloss, apply Fast Drying Top-Coat after 5 hours.
Storage
Shelf life** 24 months.
Surface preparation
and specification
Blast to Sa2.5 .
Where abrading is impossible, remove rust and loose layers mechanically, to
ST-3 . Remove any oils and foreign matter.
Paint system Primer: to obtain an extremely quick drying process apply Fast Drying Primer.
May be applied as a top-coat on all Honest synthetic paints.
Paint application Method Pressure (atm.) Nozzle Orifice Thinner Thinning Volume (%)
Brush/roller 18 Up to 10%
Regular spray 3-4 1-32 Up to 10%
Airless spray 3-4 15-21” 1-32 Up to 5%
Cleaning thinner Thinner 1-32 or thinner 18.
Application remarks Stir well before application and while painting.
Caution Any work that includes application and use of this product shall be
performed according to the applicable Safety, Health and
Environmental regulations. Read the safety precautions and the
warnings specified in the Safety Data Sheet, available at Honest
Safety Department and indicated on the product’s label.
Keep away from fire and sparks. Inedible. Provide adequate
ventilation of the work space. Use appropriate protective means, as
indicated in the Safety Data Sheet.
Do not inhale fumes when spraying this product.
Warning Never mix this material with others when not specifically recommended by us.
General comments Data presented here is based on our best knowledge and experience. We
reserve the right to update and/or alter it without prior notice. Achievement of the
best desired results is subject to proper application in strict conformance to our
instructions and safety measures. Before application, the user should verify that
the product is indeed designed for the intended usage and that the surfaces to
be painted are properly prepared, and are suitable for the product’s application.

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.