Polychloroprene Rubber Solvent Based Primer Supplier in China
Polychloroprene Rubber Solvent Based Primer paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Vinyl Coating

Chemical Resistant Chlorinated Rubber Based Enamel
Chlorinated Rubber Based Anti-corrosive Primer
Chlorinated Rubber Swimming Pool Paint
Chlorinated Rubber Enamel

Chlorinated Rubber High Build Coating
Economical Anticorrosive Chlorinated Rubber Based Primer
Tintable Chlorinated Rubber Finish
Polychloroprene Rubber Solvent Based Primer
Phisically Drying Modified Chlorinated Rubber Based Primer
General Purpose Chlorinated Rubber Primer
Chlorinated Rubber Intermediate Coating

Chlorinated Rubber Micaceous Iron Oxide coating
Premium Quality Full-bodied Smooth-flowing Vinyl-acrylic Primer
Abrasion Resistant Vinyl Ester Coating
Catalyzed Vinyl Ester Primer
Chlorinated Rubber Based Intermediate Coat

Chlorinated Rubber MIO Intermediate Coating

  

Polychloroprene Rubber Solvent Based Primer

PRODUCT SPECIFICATIONS:

PRODUCT DESCRIPTION AND USES
Neoprene Primer is a polychloroprene rubber/solvent based primer specially designed to act as a
‘keying’ agent over internal smooth non porous substrates such as quarry tiles, glazed ceramic tiles,
terrazzo, marble and magnesite, prior to the application of cement underlay.
Neoprene primer may also be necessary over steel/powerfloated concrete or precast slabs prior to
the application of floor levelling compound or where tiles are to be layed.
Neoprene primer is used as a sealer on concrete, wood, hardboard underlay, chipboard and
plywood when needed to prevent water penetration and to act as a bridging to the substrate.
Typical Substrates
• Powerfloated Concrete
• Precast Slabs
• Marble
• Terrazzo
• Magnesite
• Glazed Ceramic Tiles
• Quarry Tiles
• Particle/Chip Board
Properties
• Quick Drying
• Easy to Apply
• Excellent Coverage

PHYSICAL PROPTIES

 

 

Colour

:

Yellow

Solids

:

14% ± 1%

Flash Point

:

<-10oC

Drying Time -Ambient Temperature

:

Tack Dry 10-15 Minutes

 

:

Hard Dry 30-50 Minutes

Packaging

:

1L, 4L, 10L, L

SHELF LIFE
Twelve months from date of manufacture in unopened containers @ oC. Neoprene Primer
should not be returned to the container.
SURFACE PREPARATION
All surfaces must be dry, clean, free of oil, grease, dirt and other contaminants prior to application
of primer.
Concrete floors must be at least 50-60 days old to avoid excessive moisture content effecting
adhesion on subsequent materials. Refer technical note 17 - Testing for Moisture Content.
Concrete must be free of all surface additives.
Neoprene Primer can be applied on Particle Board, Chip Board and Plywood without the need for
sanding first.
APPLICATION EQUIPMENT
Neoprene Primer can be applied using a soft bristled brush, 6mm Mohair Roller or convention spray
equipment.

APPLICATION DATA

 

 

Recommended No. of Coats

:

1

Theoretical Spreading Rate

:

8-10m2/litre

Thinners

:

Specified thinner

Clean Up

:

Specified thinner

THINNING
Neoprene Primer is supplied ready for use and therefore should not require thinning. Where the
product has begun to thicken, approximately 5% Specified thinner can be added .
APPLICATION METHOD
Stir Neoprene thoroughly before use.
Apply an even coat of Neoprene Primer to substrate and allow to dry.
Refer relevant specification for overcoating or overlaying Neoprene Primer.

NOTES
• Ensure Neoprene Primer is used in a well ventilated area.
• Neoprene Primer is highly flammable
• Do not apply Neoprene Primer when temperature or substrate are below 10oC or above 35oC.
• Ensure a dust mask is worn whilst sanding.

FIRST AID/HEALTH AND SAFETY
Refer to material safety data sheets and general health and safety section of manual.
If poisoning occurs contact your doctor or CHEMWATCH.
RELIABILITY OF INFORMATION
All statements and technical information contained herein are based on tests we believe to be
reliable but the accuracy thereof is not guaranteed, Since we has no control over
product application, purchasers and users must confirm the suitability of our products under their
conditions to meet their own requirements.
PRODUCT WARRANTY
Refer to our informations.
OTH INFORMATION
Material Safety Data Sheets are available on request. This product may be used for a wide variety
of surfaces.

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.