Rapid Dry Pure Acrylic Coating.htm Supplier in China
Rapid Dry Pure Acrylic Coating.htm paint coating manufacture Shenzhen China  
Home About Us Products Contact Us



Honest Joy Coating & Paint
Acrylic coating

Acrylic Multi-Purpose Primer
Acrylic Eggshell Floor Enamel
Acrylic Clear Coat
Acrylic Enamel For Interior Use

Acrylic Copolymer Exterior Flat Paint
Acrylic DTM Rust Resistant Coatings
Acrylic Elastomer Coating
Acrylic Copolymer Roof Coating
Waterborne Acrylic Enamel Undercoater
Acrylic High Infraed Heat Reflectivity Coating

Acrylic Finish Gloss
Acrylic Conversion Coating
Acrylic Metal Primer

Acrylic Patching Seam Sealer
Acrylic Conversion Coating
Two Pack Catalysed Acrylic Finish
Acrylic Elastomeric Wall Coating
Quick Drying Clear Urethane Alkyd Varnish
Aluminum Acrylic Coating Automotive Grade Acrylic Lacquer Topcoat
Baking Glossy Topcoat Based On Thermoset Acrylic Resin
Rapid Dry Pure Acrylic Coating
Acrylic Urethane Catalyzed Coating
Single Pack Acrylic Poly Siloxane Finish Coating


Rapid Dry Pure Acrylic Coating.htm


Acrylic Thermo Plastic is a rapid dry, pure acrylic coating. It has superior gloss retention, ultraviolet
stability, weather resistance, as well as saltwater and corrosion resistance. Acrylic Thermo Plastic is resistant
to chemicals, does not easily chip or mar and will not chalk or yellow.
An advantage, over conventional enamels, is the extremely fast through dry time. It dries to touch in a
matter of minutes, which makes this coating an excellent choice for fast production work.
Gloss, Semi-Gloss, Flat
Metal Marine Fabrics
Wood Metallic Buildings Masonry
Plastic Wire Products Terra Cotta
Air Dry Time 10 Minutes @ 77°F
Re-coat Time 15 Minutes @ 77°F
Complete Cure 3 Days
350 Square Feet per Gallon @ 1 Mil
Apply with airless or conventional spray equipment or by dipping. Limited brushing for small areas.
HJ-10 Acrylic Reducer
HJ-53 Retardant for slower dry time in the summer months.
Clear, Black, White And Colors.
Acrylic Thermo Plastic, HJ-500 series in white, was spray applied to Bonderite 1000 panels and baked for
minutes at 180°F. The dry film thickness was 1.0 + .2 mils.
Gloss 60º 83
º 50
Adhesion Excellent
Pencil Hardness F-H
Impact Resistance, Inch lbs., Pass/Fail
Direct 19/23
Reverse 2/6
Flexibility, cylindrical mandrel
3/16” Pass
Salt Spray 5% NaCl, 95ºF, 125 Hours
Rusting No Effect
Undercutting 1/32”
Blistering No Effect
Water Immersion, 100ºF, 100 Hours
Rusting No Effect
Blistering No Effect
Cleveland Humidity Cabinet
(100ºF/100% RH) 100 Hours No Effect
QUV Weathering, 500 Hours
Loss in Gloss Trace
Yellowing No Effect
Chalking No Effect
Blistering No Effect
Rusting No Effect
Dry Time
To Touch 7 – 12 Minutes
Force Dry Temperature Up to 225ºF


Contact Us
Honest Joy Coating & Paint. All rights reserved.