Removable Petroleum-Based Liquid Barrier Coating Supplier in China
Removable Petroleum-Based Liquid Barrier Coating paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Other coating

Concrete Repair Coatings
Easy Sanding Clear Lacquer Sealer
Hydraulic Fluid Resistant Non-slip Finishes
Highly Reflective Marking Paint

Waterborne Thermosetting Glass Paint
Unsaturated Polyester Glass Flake Putty Coating Paint
Coating for Die Casting Aluminum Galvanize and Steel Parts
Semi-Transparent Organic Solvent Stain
Polyester Epoxy Coil Coating
Hard Abrasive And Weather-Resistant High Gloss Marine Varnish

Alkyd Urea Clear Coat
Concrete Aluminum And Steel Marine Structure Epoxy Coating
Zinc Rich Epoxy Powder Coating

Epoxy Powder Coating
Concrete Aluminum And Steel Marine Structure Epoxy Coating
Water Chemical Resistance Tin Lining Coating
Aqua-Loc Ceramic Topcoat
Removable Petroleum-Based Liquid Barrier Coating
Semi-Gloss Precatalyzed Lacquer
Premium High Build Precatalysed Timber Lacquer
Rapid Dry Gloss Enamel
Temperature Indicating Paint
Two Component Oxirane Ester Paint Containing Active Anti-Corrosive Pigments
Molybdenum Disulfide Slick Lubricant Coating

  

Removable Petroleum-Based Liquid Barrier Coating

PRODUCT SPECIFICATIONS:

FEATURES
• Chip resistant
• Maintenance-free once cured
• Remains flexible
• Provides semi-dry translucent brown film
• Dilutable with mineral spirits
• Fast drying
• Does not contain silicones or nitrites
• Thixotropic with excellent sag control for high build
• Moisture displacing
• Thermally stable coating over a broad range of
temperatures (-40ºF to 0ºF/-40ºC to 93ºC)
• Excellent UV resistance
• Up to 24 months of outdoor protection in a corrosive
atmosphere
• Effective for a broad range of applications under a wide
variety of outdoor environmental conditions
• Non-conductive film prevents galvanic corrosion between
dissimilar metals
• Excellent salt spray resistance
• Reduces labor
• Lowers operating costs
• No need for sheltered storage

HJ-836 is used to protect uncovered exterior
TYPICAL APPLICATIONS
surfaces and readily accessible interior surfaces in outdoor
environments during storage, processing or use. Typically the
thicker the dry film thickness (DFT), the longer the protection.
HJ-836 allows either heavy multiple coats or one
heavy single coat. For best performance use a two-coat
application.
APPLICATIONS
• External surfaces and accessible interior surfaces of large
machines, pipes, pumps, heat exchangers, boilers, turbines
and transformers during standby, field storage or shipping
• Protects any metal part, component or assembly between
processing or machining steps
• External and internal surfaces of equipment on offshore
drilling and production platforms
• Wire rope, cable, wire and chains
• Transmissions, hydraulic pistons and cylinders
• Protection of structural components
• Equipment undercoating
APPLICATION/REMOVAL
HJ-836 may be applied by dipping, brushing or
spraying. A dry film thickness of at least 2 mils or greater
is recommended for uncovered outdoor storage. HJ-836 may be diluted with mineral spirits or other
suitable diluents to facilitate application. HJ-836
can be removed with mineral spirits, alkaline cleaners
such as HJ-636, aliphatic or vapor degreasing
solvents.
METALS PROTECTED
• Carbon steel
• Stainless steel
• Cast iron
• Aluminum alloys
• Brass
• Copper-nickel alloys
TYPICAL PROPTIES
Appearance Dark brown viscous liquid
Carrier Mineral spirits
Corrosion Resistance Up to 60 months
Drying Time* 2-3 hours
Recommended Film Thickness
Dry Film 3-5 mils (75-125 microns) per
coat
Film Type Dry, waxy
Non-volatile Content 63-68%
Removal Methods Petroleum solvents
Salt Spray Resistance on Carbon Steel (1010)**
2 mils (50 microns) 900-1600 hr
Viscosity at 74ºF (23ºC) 15,000-27,000 cps
Density 7.3-7.5 lb/gal (0.87-0.90 kg/l)
*Depends on direct sunlight, air-flow, temperature, etc. A 6-8
mil (150-0 micron) wet film in direct sunlight with 70ºF (21ºC)
temperatures will dry in approximately minutes. Allow more time
if dried in shade, less time if air movement can be added.
**in hours according to ASTM B-117 Standard.
RECOMMENDED SPRAY EQUIPMENT
This information is based on spraying HJ-363 at 3
parts concentrate to 1 part mineral spirits.
Cap Standard
Filter 60 Mesh High Pressure
Air Pressure 80 psi (550 kPa)
3/8” x 10’ with whip hose for ease of
handling
(0.9525 cm x 3 m x 0.635 cm)
Fluid Pressure 00/1700 psi (138/117bar)
(Supply/Gun)
The minimum fluid atomization pressure required is 1500
psi (103 bar), which gives 2-4 mils (50-100 microns)
WFT/pass.
EXPOSURE LIMITATIONS
For use in uncovered outdoor storage for up to 60 months.
Provides excellent protection in outdoor, inside and sheltered
storage.
PACKAGING AND STORAGE
HJ-836 is available in 5 gallon (19 liter) containers
and 55 gallon (8 liter) steel drums. Products should be
stored in a securely closed container. Shelf life is 24 months.
FOR INDUSTRIAL USE ONLY
KEEP OUT OF REACH OF CHILDREN
KEEP CONTAIN TIGHTLY CLOSED
NOT FOR INTNAL CONSUMPTION
CONSULT MATIAL SAFETY DATA SHEET FOR MORE
INFORMATION

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.