Sand Finish Texture Coating Supplier in China
Sand Finish Texture Coating paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Texture coating
Quality Coarse-textured Coating
Quality Fine-textured Coating
vvv Textured Finish
Medium Fine Textured coating
Polyurethane Textured Topcoat
Epoxy polyamide texture Coating
Marble Finish
Rubber Soft Touch coating textured coating
Fibered White Elastomeric Coating

  

Sand Finish Texture Coating

Product Description:

This coating is a bright white, flat finish, acrylic elastomeric, insulating ceramic, waterproofing textured wall coating. It is a 100% acrylic waterborne, latex based, high build formula that provides waterproofing and soundproofing, and also insulates, beautifies and protects. It is a self-priming coating that forms a thick rubber-like ceramic shield of protection that actually becomes part of the wall due to excellent adhesion and bonding. It will expand and contract with varying hot and cold temperatures, and resists thermal shock. Unsurpassed in technology, This coating offers superior mildew resistance, corrosion resistance, ceramic insulation & soundproofing, excellent adhesion, ultraviolet ray reflectivity and a beautiful finish. It qualifies for a CLASS A Fire Rating. Designed as an insulating, energy saving textured wall coating that stabilizes and strengthens walls while combating the destructive environmental forces of nature. This coating offers a 15 YEAR LIMITED WARRANTY when applied to manufacture’s specifications(Application Procedure manuals available upon request). This coating will eliminate costly maintenance, repairs and frequent repainting. This easy to apply, maintenance free textured wall coating system will provide years and years of durable protection and outstanding beauty.

Product Uses:

This coating possesses excellent adhesion on weathered wood, shakes, plywood, clapboard, primed metal galvanized, primed synthetic or aluminum siding, tin, copper, asbestos, asphalt, urethane, polyester, Styrofoam, polystyrene, fiberglass, clay, adobe, brick, stucco, slate, slab, and various other substrates. For residential, commercial and industrial applications.

Top Coat:

A non-textured coat of either sealer flat or stain satin Finish is required over HONEST . Use the appropriate product for the desired finish.

Surface Preparation:

Trenching is necessary to form a complete seal. Trench 4 to 6 inches around the perimeter of the structure. For proper adhesion it is essential that the surface be pressure washed ate a minimum of 1500 P.S.I., suing a water and chlorine solution, removing any loose, flaking or peeling paint along with any oil, grease, residues and especially mold, mildew and algae. Wire brush if necessary. HONEST  will resist mildew growth, but will not kill mildew already on the surface. If the surface remains chalky or is in poor condition after cleaning, a coat of Honest primer, Clear Adhesion Bonding Primer, is necessary. Rusty metal must be primed with METAL-PRIME, Red Iron Oxide Primer Sealer.

Application Procedure:

Stir well before using. Do not thin, use product as is. Do not apply when the temperatures are below 45 degrees. Fahrenheit or when humidity is very high. Do not apply when coating will be subjected to rain or heavy dew before it has had enough time to dry(approximately 4 to 6 hours). Dry time will vary depending on temperature, humidity and location. Product  can be applied using brush, roller and spray. Hopper type spray equipment is recommended. Spread uniformly. If desired surface texture is not achieved, wait at least 12 hours, then apply a second coat of this coating. At least one coat of HONEST  and one coat of either STAIN is required for warranty compliance.

Clean Up:

Clean up all spills, tools and overspray immediately while the coating is still wet with warm soapy water.

Technical Specification

Item

Data

Finish

Flat

Color

White

Vehicle Type

Copolymer Emulsion

Solids by Weight

63%±2%

Solids by Volume

43%±2%

V.O.C.’S(averages)

61 Ibs./gal 73.2 grams/liter

Spread Rate:

40-75 sq.ft./gal

Dry to touch

2-4 hours

Cure Time

5-7 Days

Sizes

1 Gal., 5 Gal., 55 Gal

Gallon Weight

11.2 ibs. ± 3 ibs

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.