Semi-Transparent Organic Solvent Stain Supplier in China
Semi-Transparent Organic Solvent Stain paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Alkyd coating

Urethane-Modified Alkyd Primer
Urethane Alkyd Enamel
Urethane Alkyd Based Toopcoat
Epoxy Ester Modified Alkyd Primer

Superior Quality Alkyd Glaze
Speedy-Dry Alkyd Enamel
Silicone Modified Alkyd Enamel
Semi-Transparent Organic Solvent Stain
Rust-Inhibitive Patented Acrylic Modified Alkyd Enamel
Quick-Drying Styrenated Alkyd Paint

Alkyd Urea Clear Coat
Transparent Modified Alkyd Sealer
Alkyd Semigloss Finish
Transparent Modified Alkyd Sealer
Quick Drying Modified Alkyd Based Primer
Rust Preventing Primer
Quick Drying Clear Urethane Alkyd Varnish
Versatile Finish Coat Based On Long Oil Alkyd Resin Exceptionally Durable Fast Drying Alkyd Paint
Fast Dry Alkyd Metal Primer
Alkyd Gloss Enamel
High Gloss Alkyd Aluminum Paint
Alkyd Baking Enamel

  

Semi-Transparent Organic Solvent Stain

PRODUCT SPECIFICATIONS:

DESCRIPTION A semi-transparent, organic solvent stain that produces a lasting, durable finish. It highlights the natural beauty of wood.
USES Ideal for smooth or roughsawn lumber, impregnated timber, paneling, exterior furniture and fences.
COLORS Semi-transparent, mechanically calibrated colors
SURFACE PREPARATION NEW WORK: SMOOTH LUMB 1 coat of Semi Transparent Stain. If a second coat must be applied, apply within -60 minutes after first coat, so that this first coat is not yet dry (apply "wet on wet"). Approximately one hour after second coat is dry, remove any remaining stain that has not penetrated in the wood.
ROUGHSAWN LUMB 2 coats of Semi Transparent Stain. If a second coat must be applied, apply within -60 minutes after first coat, so that this first coat is not yet dry (apply "wet on wet"). Approximately one hour after second coat is dry, remove any remaining stain that has not penetrated in the wood.
RESTAIN (PREVIOUSLY COATED SURFACES): Same procedure as described above. For surface where chalking appears, mechanical washing is recommended. *New wood must be stained right away.
If not, excessive weathering can shorten the life of the wood and the coating applied to it.
DRY TIME
At 77°F (25°C) 50% RH To Touch: 0.5 Hours To Use: 16 Hours


APPLICATION

Brush:

Nylon or polyester

Roller:

3/8" nap cover

Pad: Standard

Conv. Spray:

At package consistency.

Airless Spray:

At package consistency.

LIMITATIONS DO NOT topcoat with other finishes until film has weathered for a minimum of 2 years. DO NOT use on roofs. The color is influenced by the texture, grain, porosity and type of the wood, as well as type of topcoat.
NOTES Do not use as a colorless (clear) finish.

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.