Silicone Based Heat Resistant Coating Supplier in China
Silicone Based Heat Resistant Coating paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Fire proof retardant heat resistance coating

VOC Compliant Air Drying Silicone Based Heat Resistant Coating
Two-Component State-OF-The-Art Silicone Coating
Fouling Release Tiecoat

Single Component High Heat Aluminum Coating
High Heat Resistant Black Coating
Silicone Based Heat Resistant Coating
Quick Drying Heat Resistant Aluminium Enamel
Aluminium Heat Resistant Pure Silicone
Air Drying Self-Priming Heat And Corrosion Coating

Compliant VOC High Build Modified Silicone Coating
Solventborne Silicone Coating
Heat Reflective Ceramic Coating

General Purpose Aqueous Based Fire Retardant Surface Coating
Solventborne Silicone Coating
Air Drying Self-Priming Heat And Corrosion Coating
One-Coat Aluminum Fire Resistance Coating
Coloured Heat Resistant Acrylic Silicone
Fire Retardant Coating

  

Silicone Based Heat Resistant Coating

PRODUCT SPECIFICATIONS:

General Properties
A fast drying, heat resistant enamel that offers a good balance between esthetics and performance. This product
combines excellent weathering resistance, adhesion and overall durability with ease of application in a semi gloss
finish.
Recommended Uses
For use on interior and exterior surfaces in plants, mills, boiler rooms and on ferrous metals where good, long-term
temperature and weather resistance is required.
Product Information

Methods of Application
AIRLESS SPRAY

CONVENTIONAL
BRUSH / ROLL Brushing is limited to small areas or touch-up
Drying Time - Temperature, Relative Humidity, and Film Thickness will affect dry and re-coat times.


Substrate
Temperature

Touch Dry

Hard Dry

Minimum

Overcoat Interval
Maximum

Normal

25oC (77oF)

30 minutes

see Limitations

2 hours

indefinite

3 hours

Recommended Primer
STEEL
Self Priming if exposed to continuous high tempertures.
CONCRETE
Not Recommended
GALVANIZED
Not Recommended
ALUMINUM
Not Recommended
Surface Preparation
All surfaces must be clean, dry and free of contaminants. For best performance and service, an SSPC- SP10 Near
White Blast Cleaning is recommended on steel or iron. Two coats are recommended on steel. Reduce first coat 30%
when applying to HJ-00125. Surface profile should not exceed 1.5 mils when used without a primer. (see Limitations)
Limitations
Not for extended temperature service above 216oC (4oF). Light colors will yellow above 5oC (400oF). A primer may
be required to fill the blast profile as this is a thin film coating.
Mixing Instructions
Mix well before using. Keep containers tightly sealed when not in use.
Safety Precautions
This product is for industrial use only. Refer to Material Safety Data Sheet for proper health and safety information.
Storage and Handling
FLASH POINT
4oC (40oF) TCC
PRODUCT WEIGHT
9.15 lbs/gal (container extra)
STORAGE
Cool, dry, secure location.
PACKAGE SIZE
1 gallon
Some package sizes or colors may be by special order only. Please check with us when ordering.
 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.