Textured Finish Supplier in China
Textured Finish Coating paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Texture coating
Quality Coarse-textured Coating
Quality Fine-textured Coating
vvv Textured Finish
Medium Fine Textured coating
Polyurethane Textured Topcoat
Epoxy polyamide texture Coating
Marble Finish
Rubber Soft Touch coating textured coating
Fibered White Elastomeric Coating

  

Textured Finish

DESCRIPTION

This fabric-like textured finish creates a suede effect that is perfect for casual living rooms, dining rooms and bedrooms. It is a two-coat system, which creates a subtle texture and color depth.

USES

Recommended for properly prepared wallboards, gypsum / plaster, wood and bricks.

SIZES

¼ Gallon (Quart), 1 Gallon (only after special order).

COLORS

May be tinted into 30 color choices.

SURFACE PREPARATION

NEW WORK:
UNPAINTED SURFACES - WALLBOARD, DRYWALL, WOOD
Fill/ patch all necessary spots with white patching paste or spackle and allow to dry. Sand smooth and remove dust with a dampened rag. All patched/ filled spots must be primed with Honest Interior Latex Primer. Prime the entire surface before applying the topcoat to ensure an even appearance and good application of the basecoat.
UNPAINTED SURFACES - MASONRY (BRICK, CONCRETE, AGGREGATE BLOCK)
The surface must be clean, dry and dull. Allow surface to cure for 30 days before applying the product. Patch/ fill required spots with appropriate putty and allow to

dry. Prime the entire surface with Pratt& Lambert Interior Latex Primer before applying the topcoat.
PREVIOUSLY PAINTED SURFACES
Scrape and sand peeled or checked paint to a sound surface. Sand glossy surfaces dull before applying the product. Wash the surface with a thin solution of detergent (do not use detergent that leaves residue). Rinse the surface thoroughly and allow to dry completely.Prime all required spots with appropriate material. After dry, sand smooth and remove dust with a rag dampened with water. All patched/ filled spots must be primed with Honest Interior Latex Primer.
PLAST / GYPSUM (NEW OR OLD)
Make sure surface is clean, dry and dull. Allow plaster to cure for 30 days before applying the product. Patch/ fill required spots with appropriate material. After dry, sand smooth and remove dust with a dampened rag. Treat textured, soft, porous or powdery plaster with a solution of 1 pint (~ 0.5l) of household vinegar to 1 gallon of water. Repeat until surface is hard. Rinse with water and allow to dry. All patched/ filled spots must be primed with Pratt& Lambert Interior Latex Primer. Prime the entire surface before applying the topcoat to ensure an even appearance and good application of the basecoat.

PRODUCT DETAIL

Vehicle:
Sheen:
%Solids:
By Weight:
By Volume:
Weight/Gallon:
Flashpoint:
VOC

Latex
Not applicable
53%
39%
4.94 kg

259°C
106 g/l

Thinner:
Cleanup:

Water
Soap and water

 

Dry time:
To Touch:
To Topcoat:
Coverage:

 

Application:
Brush:
Roller:

 

Care of freshly painted surface:
Ovation Classic Suede may be gently washed after 30 days.

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.