Waterborne Satin Enamel Supplier in China
Waterborne Satin Enamel paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Waterborne Coating

Waterborne Satin Enamel
Water-Borne Premium Quality Acrylic Primer
Water-Borne High Performance Interior Acrylic Primer Undercoat
Two-Part Water-Borne Linear Polyurethane Enamel

Water-Borne Epoxy Primer
Water Reducible Urethane Primer
Water Reducible Enamel
Water Miscible Epoxy Coating
Water Borne Inorganic Zinc Rich Silicate Primer
Two-Component Water-Borne Epoxy Primer

Water Based Two-Component Epoxy Polyamide Finish
Water-Borne High Performance Acrylic Metal Primer
Water Based Gloss Epoxy Enamel

Urethane Modified High Solids Water Borne Coating
Water-Borne High Performance Acrylic Metal Primer
Water Borne Acrylic Protective Coating
Arylic Thermo Plastic Waterbase Finish
Self-Levelling Epoxy Flooring Water Borne
Acrylic Water borne Paint Eggshell Waterborne Interior Paint
Environmentally Friendly Waterborne Metal Primer
Fast Drying Interior Exterior Primer
Acrylic Water borne Paint
High Gloss Waterborne Aliphatic Polyurethane Enamel

  

Waterborne Satin Enamel

PRODUCT SPECIFICATIONS:

 

DESCRIPTION

A fast drying, waterborne satin enamel finish providing spatterless application. Easy to apply and low odor. It is formulated to resist soiling, staining and marring.

USES

Recommended for interior walls, ceilings, doors and trim. Ideal for use on wood, metal, masonry, drywall and plaster/ gypsum surfaces.

SIZES

1 Gallon, ¼ Gallon (Quart).

SURFACE PREPARATION

NEW WORK:
NEW WOOD

PRODUCT DETAIL

Vehicle:
Sheen:
%Solids:
By Weight:
By Volume:
Weight/Gallon:
Flashpoint:

Waterborne Vinyl Acrylic
Satin (25-35 at 60°)
53%
35%
4.76 kg
259°C

Volatile Organic Compounds (VOC) Level:

Max. 250 g/l (2.08 lbs/gal)

Thinner:
Cleanup:
Dry time:
To Touch:
To Recoat:
To Use:

Water
Soap and water
At 77°F (25°C) 50% RH
0.5 Hour
4 Hours
4 Hours

Recommended Film Thickness:

Dry:
Wet:

36 μm
97 μm

 

Spot prime the knots with 11.
1 coat of 11 (best) or 1. 1 or 2 coats of Interior Latex Satin Enamel.
METAL 1 coat of 9 (best) or 3.
1 or 2 coats of Interior Latex Satin Enamel.
PLAST/ GYPSUM New: After dry, 1 coat of 1.
Old - 60 days after application, 1 coat of 111 or 2 coats of Interior Latex Satin Enamel.
MASONRY OR CONCRETE/ AGGREGATE Allow the new surface to cure for, at least, 30 days. 1 or 2 coats of Interior Latex Satin Enamel. (Use a professional surface filler to patch/ fill surface holes and imperfections).
DRYWALL 1 coat of 4. 1 or 2 coats of Interior Latex Satin Enamel.
REPAINT (PREVIOUSLY PAINTED SURFACES):
Spot prime bare areas with appropriate primer.
1 or 2 coats of Interior Latex Satin Enamel.

 

Coverage:
Application:
Brush:
Roller:
Pad:
Conv. Spray:
Airless Spray:

38 sq.m / gallon
Nylon or polyester
3/8'' nap cover
Standard
Thin with up to 1 pint
(~ 0.5 l) of water
At package consistency

 

 

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.