Waterborne Thermosetting Glass Paint Supplier in China
Waterborne Thermosetting Glass Paint paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Other coating

Concrete Repair Coatings
Easy Sanding Clear Lacquer Sealer
Hydraulic Fluid Resistant Non-slip Finishes
Highly Reflective Marking Paint

Waterborne Thermosetting Glass Paint
Unsaturated Polyester Glass Flake Putty Coating Paint
Coating for Die Casting Aluminum Galvanize and Steel Parts
Semi-Transparent Organic Solvent Stain
Polyester Epoxy Coil Coating
Hard Abrasive And Weather-Resistant High Gloss Marine Varnish

Alkyd Urea Clear Coat
Concrete Aluminum And Steel Marine Structure Epoxy Coating
Zinc Rich Epoxy Powder Coating

Epoxy Powder Coating
Concrete Aluminum And Steel Marine Structure Epoxy Coating
Water Chemical Resistance Tin Lining Coating
Aqua-Loc Ceramic Topcoat
Removable Petroleum-Based Liquid Barrier Coating
Semi-Gloss Precatalyzed Lacquer
Premium High Build Precatalysed Timber Lacquer
Rapid Dry Gloss Enamel
Temperature Indicating Paint
Two Component Oxirane Ester Paint Containing Active Anti-Corrosive Pigments
Molybdenum Disulfide Slick Lubricant Coating

  
Waterborne Thermosetting Glass Paint coating manufacture Shenzhen China Waterborne Thermosetting Glass paint coating manufacture Guangdong China Water based Thermosetting Glass paint coating manufacture Shenzhen China
Waterborne Thermosetting Glass Paint coating manufacture Shenzhen China Waterborne Thermosetting Glass paint coating manufacture Guangdong China Water based Spray Glass coating Shenzhen China

Waterborne Thermosetting Glass Paint

PRODUCT SPECIFICATIONS:

  1. Description:

Waterborne Thermosetting Glass Paint is a waterborne silicone modified acrylic coating designed for glass finishing. It provides a hard and tough coating at 2.3 lb/gal VOC compliance without the hazards of flammable solvents. This coating is able to provide our customers with extremely unique looks such as gradiated sprays, partial and full bottle coatings and effects such us fluorescents, antiquing, crackles, etc.

  1. Recommended Use:

 

Light glass, decorated glass, furniture glass, bottle etc.

  1. Advantages:

 

• Excellent flexibility and toughness to glass comparing to most solvent based coating
• Less than 1.0 lb/gal Volatile Organic Emissions
• Excellent flow and leveling
• Excellent optical transparency for clear coating
• Reduces with water, means considerable cost savings in solvent
• No flash point
- reduced fire hazards
-possible lower insurance rates
• Water can be used for cleanup of equipment
• Free of lead and chromate hazards
• Lower odor, improved working conditions
• Full color and lower gloss range available
• Ideal for use on a wide range of glass products for both interior and exterior application
• Versatile - may be applied by conventional, HVLP, air-assisted airless spray methods

  1. Specifications:

 

Color:Clear or required
Gloss:Max 70
Weight Solids: 32.0 ± 2%
Volume Solids:28.4 ± 1%
Viscosity (4# Coating Cup 25℃):± 2seconds

Hardness (Pencil):≥3
Adhesion:0
PH Value:7.5-8.5
Recommended film thickness:
Wet :60± (μm)
Dry 15 - 25(μm)
Spreading Rate(no application loss)
338-589 sq ft/gal @ 0.8-1.3 mils DFT
Force Dry: -30 minutes at 150-0℃, then air dry 4 hours to pack
Flash Point:>93℃, Seta Flash Closed Cup
Air Quality Data:
Non-photochemically reactive
Volatile Organic Compounds (VOC), maximum, less water
2.3 lb/gal, 274 g/L
Volatile Organic Emissions
maximum 0.93 lb/gal, 111 g/L
Hazardous Air Pollutants free
 

  1. Application:


Reduction:
Ratio: Coating: Water=100:-30. If needed, optimize viscosity to 17 seconds(4#coating cup) , reduce with water up to 30% by volume to improve flow.  Note: higher viscosity may result in bubbles in film.
Recommended film thickness:
1 cross spray which is about ± 5(μm)
Conventional Spray:
Air Pressure ..........................45-55 psi
Fluid Pressure ........................ 5-10 psi
Needle/Tip ........................ .046-.055"
Airless Spray:
Pressure ...................... 1500-1900 psi
Tip ................................................ .011"
Air Assisted Airless:
Air Pressure ..........................15- psi
Fluid Pressure ................. 450-850 psi
Tip ...................................... .011-.013"
Reducer ...................................... water
Reduction Rate .... as needed up to 30%
HVLP:
Air Pressure at Cap .................. 6-8 psi
Fluid Pressure .......................... 4-8 psi
Needle/Tip ......................... .046-.055"
Brush:
Natural Bristle
Dip:
Excessive agitation or turbulence on part immersion or withdrawal may cause foaming.
Some applications and equipment setups, especially air assisted airless and airless, may be prone to micro foaming of the wet film which will give lower gloss and clarity. Do not use higher pressures than needed for atomization.
Cleanup:
After cleaning, flush equipment completely with water

  1. Storage

Shelf Life: 1 year, unopened, inside storage, keep from freezing

 

  1. Cautions:

 

WARNING:
VAPOR HARMFUL. Use only with adequate ventilation. Wear an appropriate properly fitted vapor/particulate respirator during and after application, unless air monitoring demonstrates vapor/mist levels are below applicable limits. Follow respirator manufacturer’s directions for respirator use. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if
irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.

SPILL AND WASTE: Remove all sources of ignition. Ventilate and remove with inert absorbent. Incinerate in approved facility. Do not incinerate closed container. Dispose of in accordance with , State, and Local regulation regarding pollution. DELAYED EFFECTS FROM LONG TM OVEXPOSURE.

Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal.
Contains 2-Butoxyethanol which may cause blood damage.

DO NOT TAKE INTNALLY. KEEP OUT OF THE
REACH OF CHILDREN.
FOR INDUSTRIAL USE ONLY.
SEE MATIAL SAFETY DATA SHEET.

 

The above information and data are for reference only, it does not constitute a legal liability of our company' warranties or statements.  The information and data are utilized the experiences carried out by our laboratory tests. Before use this information, you need to self-determine the most appropriate formula, process and control methods to ensure products meet your need for consistency and quality.

 

 

 

Waterborne Thermosetting Glass Paint coating manufacture Shenzhen China Waterborne Thermosetting Glass paint coating manufacture Guangdong China Water based Thermosetting Glass paint coating manufacture  China


Contact Us
 
Honest Joy Coating & Paint. All rights reserved.