Zinc Phosphate Primer Supplier in China
Zinc Phosphate Primer
 Coating paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Zinc primer

Zinc-rich Ethyl Silicate Based Coating
Zinc Silicone Primer Heat Resistant to 500F
Zinc Rich Epoxy Primer
Zinc Rich Epoxy Cold Galvanising Coating

Zinc Phosphate Primer
Zinc Phosphate High Build Anticorrosive Primer-Finish
Zinc Ethyl Silicate Primer
Zinc Chromate metal Primer
Weldable Modified Zinc Ethyl Silicate Pre-fabrication Primer
Two-component Zinc Rich Epoxy Primer
Surface Tolerant Reinforced Inorganic Zinc Primer

Solvent-borne Self-curing Inorganic Zinc Silicate Primer
Reinforced Inorganic Zinc Primer
Chlorinated Rubber Zinc Rich Coating

Epoxy Zinc Phosphate Iron Oxide Primer
Epoxy Polyamide Anticorrosive High Performance Primer

Fast Drying Low VOC Zinc Rich Epoxy Primer

Inorganic Hybrid Zinc Rich Protective High Temperature Primer
Quick Dry High Performance Zinc Phosphate Primer
Free Low VOC Rreinforced Inorganic Zinc Primer
Solvent-borne Self-curing Inorganic Zinc Silicate Coating



  

PRODUCT SPECIFICATIONS:

A solvent-borne premium quality metal primer for use over correctly prepared ferrous and non-ferrous metals.
AVAILABILITY
Colour Range Light grey.
Packaging 1 & 5 litre
PROPTIES
Drying Time Under normal drying conditions surface dry 3-4 hours and recoatable after 16
hours. Allow for adequate ventilation during the drying period.
Finish Matt.
Composition
Pigment: Titainium dioxide Zinc phosphate and extenders.
Resin: Alkyd.
Solvent: White Spirit.
Spreading Rate 15m² per litre on smooth surfaces.
Wet Film Thickness 67 micrometres at 15m² per litre.
Dry Film Thickness 28 micrometres at 15m² per litre.
Volume Solids 42%
Flash Point 40ºC (closed cup)..
VOC Content : 600 g/l (07) / 500 g/l (10) This
product contains max. 425 g/l VOC.
Limitations Do not apply when air or substrate temperatures are likely to fall below 5ºC or
when the relative humidity is above 80% during application or the drying
period.
PREPARATION
New Surfaces Surfaces must be clean and free from anything that will interfere with the
materials to be applied. Wash with hot water and liquid detergent solution to
remove oil, grease or any other contaminants, frequently changing the water.
Rinse thoroughly with clean water. Allow to dry. Remove all millscale and rust
back to clean metal. Remove all residues.
Previously decorated surfaces All surfaces must be suitably dry, and free from anything that will interfere with
the adhesion of the materials to be applied. Remove all loose, and failing or
suspect paint. Feather edges of sound paint. Remove all dust. Remove all
rust. Spot prime bare areas with one coat of Zinc Phosphate
Primer. Wash remaining sound paint with hot water and liquid detergent
solution to remove any contaminants, frequently changing the water. Wet
abraded to provide a key. Rinse with clean water to remove all residues.
Allow to dry. Bring forward spot primed areas as required by paint system to
be used.
COATING SYSTEM Apply one coat.
APPLICATION Stir well before use. Apply by brush or roller.
CLEANING Return surplus material to container. Clean with a proprietary cleaner
immediately after use.
HEALTH AND SAFETY Please refer to the Safety, Health and Environmental Information on the container.
Take special precautions during the surface preparation of pre 1960’s painted surfaces
as they may contain harmful lead.us. When preparing all surfaces avoid the inhalation of dust
and/or metal particles. Wear a suitable facemask. Store in secure dry conditions inaccessible to children or animals.
Containers should be kept closed during storage. Do not empty into drains,
watercourses or access routes to septic tanks.
GENAL INFORMATION .Under normal and frost free conditions this product will remain usable
for up to two years if stored correctly and unopened.
Every care is taken to ensure that all information provided on this Technical Data
Sheet is accurate. Honest joy is unable to guarantee results as it has no control
over the conditions under which its products are applied.
Before using this product please ensure you have the latest information.

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.