aliphatic polyurea
weather resistant Structural steel paint coating polyurethane epoxy  Nitrocellulose UV unsaturated PE paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Polyurea Coating
Aliphatic Polyurea
Brushable Polyurea
Polyurea Rubber Coating
Polyurea Roof Coating Primer
Elastomeric Polyurea Binder for Joints, Nosing and Spall Repair Binder Polyurea
Pure Polyurea Elastomer Coating
Sprayable Aliphatic Polyurea Coating
Waterproof Polyurea Elastomer
  
PRODUCT DESCRIPTION 70860/70865 is a low odor, fast set, high solids, twocomponent aliphatic polyurea that exhibits excellent UV stability, gloss retention and quick cure characteristics that will allow foot traffic in as little as four hours. Designed to be used as a topcoat for any NEOGARD® decorative flooring system where UV resistance is desired, it is also an excellent choice for walkways, distribution centers, commercial hallways and public areas where high gloss retention is preferred. FEATURES • Quick cure • High gloss • Abrasion resistant • UV resistant for superior gloss retention • Very durable, excellent weatherability PRODUCT NUMBS AND COLORS 70860 - Clear/Colorless 70865 - Clear/Colorless CURED FILM PFORMANCE Description Test Method Results Tensile Strength ASTM D412 3,500 psi Elongation ASTM D412 90% Permanent Set ASTM D412 % Water Resistance ASTM D471 1.6% MVT @ 12 mils ASTM E96 0.23 Perm Taber Abrasion ASTM D4060 40 mg/1,000 rev cs17 Shore A ASTM D2240 95 Shore D ASTM D2240 54 Adhesion to Concrete ASTM D4541 500 psi The above tested results are typical values. Individual lots may vary up to 10% from the typical value. PRODUCT DATA Description Test Method Results Mix Ratio 1:1 (vol) with 70865 Weight/Gal (mixed) ASTM D1475 8.4 lbs/gal Weight Solids (mixed) ASTM D49 76% Volume Solids (mixed) Calculated 73% VOC (mixed) 24 238 g/L Viscosity (mixed) ASTM D2196 70 cps Flash Point ASTM D3278 115oF Pot Life @ 75oF, 50% RH 1 hr Dry to Touch 1/2 hr Dry to Walk-on 3 hrs Shelf Life 1 year The above tested results are typical values. Individual lots may vary up to 10% from the typical value. DIRECTIONS FOR USE THINNING: Do not thin. APPLICATION: Mix thoroughly before application. May be applied by brush, roller or airless spray equipment. CLEAN UP: Clean up equipment or spills immediately with Xylene, carefully observing cautions on container labels. LIMITATIONS For interior use only. HANDLING & STORAGE Keep containers tightly closed. Store in protected area. Ideal storage temperature range for ease of handling is 50oF to 85oF. HEALTH AND SAFETY Read the Material Safety Data Sheet (MSDS) and container labels for detailed health and safety information. This product is intended for industrial use by properly trained professional applicators only.


Contact Us
 
Honest Joy Coating & Paint. All rights reserved.